ALLEGRO MICROSYSTEMS - ACS712ELCTR-05B-T - Linear Current Sensor, Hall Effect, +/- 5A, SOIC-8

Fully Integrated, Hall-Effect-Based Linear Current Sensor IC with 2.1 kVRMS Voltage Isolation and a Low-Resistance Current Conductor

IC, SENSOR, CURRENT, 5A, SOIC8, 712; Hall Effect Type:Linear; Output Current:10mA; Sensor Case Style:SOIC; No. of Pins:8; Supply Voltage Range:4.5V to 5.5V; Operating Temperature Range:-40°C to +85°C; MSL:MSL 2 - 1 year; SVHC:No SVHC (15-Dec-2010); Accuracy:1.5%; Bandwidth:380kHz; Base Number:712; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Package / Case:SOIC; Polarisation:Unipolar; Sensor / Transducer Type:Current; Supply Voltage Max:5.5V; Supply Voltage Min:4.5V; Termination Type:SMD

Allegro MicroSystems

Allegro MicroSystems ACS712ELCTR-05B-T

Rochester Electronics

DigiKey

Mouser

Arrow Electronics

Accuracy

Ambient Temperature Range High

Bandwidth

Case/Package

Current Sensing

Frequency

Height

Lead Free

Length

Linearity

Max Junction Temperature (Tj)

Max Operating Temperature

Max Supply Current

Max Supply Voltage

Min Operating Temperature

Min Supply Voltage

Mount

Number of Channels

Number of Pins

Operating Supply Current

Operating Supply Voltage

Output Current

Packaging

Polarity

Quiescent Current

REACH SVHC

Response Time

RoHS

Schedule B

Sensing Method

Sensitivity (mV/A)

Termination

Width

Current Sensor 3A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (.154", 3.9mm Width)

IC, HALL EFFECT CURRENT SENSOR; MSL:MSL 2 - 1 year; SVHC:No SVHC (20-Jun-2011); Bandwidth:80kHz; Hall Effect Type:Linear; No. of Pins:8; Operating Temperature Range:-40°C to +85°C; Output Current:10mA; Package / Case:8-SOIC; Supply Voltage Max:5V; Supply Voltage Min:4.5V; Termination Type:SMD

Allegro MicroSystems ACS712ELCTR-30A-T

Output Voltage

HONEYWELL S&C SS94A2 Hall Effect Sensor, Linear, 1 mA, SIP, 3 Pins, 6.6 VDC, 12.6 VDC

Hall Effect Sensor; Sensor Terminals:Through Hole; Supply Voltage Max:12.6VDC; Supply Voltage Min:6.6VDC; Current Rating:30mA; Mounting Type:Through Hole; Operate Point Max:500G; Operate Point Min:-500G; Operational Type:Sink/Source ;RoHS Compliant: Yes

IC, HALL EFFECT TRANSDUCER; Hall Effect Type:Linear; Output Current:1mA; Sensor Case Style:SIP; No. of Pins:3; Supply Voltage Range:6.6V to 12.6V; Operating Temperature Range:-40°C to +125°C; SVHC:No SVHC (19-Dec-2011); Base Number:94; IC Generic Number:94; Logic Function Number:94; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Package / Case:SIL; Supply Voltage Max:12.6VDC; Supply Voltage Min:6.6VDC; Termination Type:Through Hole

The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. APPLICATION CONSIDERATION: The output is clamped at the high end. Clamping voltage may be as low as 9 Vdc. The output will not exceed the clamping voltage regardless of field strength or power supply.

Honeywell

Honeywell SS94A2

Onlinecomponents.com

Powell Electronics

Verical

Master Electronics

Newark

Farnell

Current Rating

Depth

Housing Material

Max Output Current

Max Supply Voltage (DC)

Min Supply Voltage (DC)

Nominal Supply Current

Output Type

Switching Current

Board Mount Hall Effect / Magnetic Sensors Flat TO-92, 3.0Vdc Ratiometric, PCB

Sensor Linear Hall Effect Straight Leads Flat TO-92 Style | Honeywell SS49E

Hall Effect Magnetic Sensor; Operate Point Max:1000G; Release Point Min:650G; Supply Voltage Max:6.5V; Supply Voltage Min:3V; Sensor Terminals:Through Hole; Supply Current:6mA; Supply Current Max:10mA ;RoHS Compliant: Yes

The SS49E and SS59ET Series Economical Linear Hall-effect sensors are small, versatile linear Hall-effect devices that are operated by the magnetic field from a permanent magnet or an electromagnet. The linear sourcing output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field. The integrated circuitry features low noise output, which makes it unnecessary to use external filtering. It also includes thin film resistors to provide increased temperature stability and accuracy. These linear Hall sensors have an operating temperature range of -40 °C to 100 °C [-40 °F to 212 °F], appropriate for commercial, consumer, and industrial environments.

SENSOR, HALL EFFECT, LINEAR; Contact Configuration:Radial Lead IC; Current, Supply:6mA; Input Current:10mA; No. of Pins:3; Output Configuration:Source; Output Current:1.0mA; Sensor Housing:Rectangular; Sensor Type:Hall-Effect Linear Position Sensor; Series:SS49E; Speed, Switching:3µs; Temp, Op. Max:100°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Time, Response:3µs; Voltage, Output Max:1.75mV; Voltage, Output Min:1.0mV; Voltage, Supply DC Max:6.5V; Voltage, Supply Max:6.5V dc; Voltage, Supply Min:3.0V dc

Honeywell SS49E

Sager Electronics

Chip One Stop Global

element14 APAC

Carlton-Bates

TTI Europe

Input Current

Leakage Current

Radiation Hardening

Type

Sensor;  Sink;  4.5 to 10.5 VDC;  8.7 mA @ 5 VDC;  0.2 VDC (Typ.)/0.4 VDC (Min.)

HALL EFFECT SENSOR, LINEAR, TO-92-3; Sensor Case / Package: TO-92; No. of Pins: 3Pins; Supply Voltage Min: 4.5V; Supply Voltage Max: 10.5V; Operating Temperature Min: -40°C; Operating Temperature Max: 150°C 73K4042

Hall Effect Sensor; Operate Point Max:670G; Operate Point Min:-670G; Package/Case:TO-92; Supply Voltage Max:10.5VDC; Supply Voltage Min:4.5VDC; Mounting Type:Through Hole; No. of Contacts:3; Operational Type:Sink/Source ;RoHS Compliant: Yes

SS490 Series MRL (Miniature Ratiometric Linear) sensors have a ratiometric output voltage, set by the supply voltage. It varies in proportion to the strength of the magnetic field.A new Hall effect integrated circuit chip provides increased temperat

SENSOR, HALL EFFECT, RATIOMETRIC, LINEAR; Sensor Terminals:Through Hole; Output Voltage Min:400mV; Supply Voltage Range DC:4.5V to 10.5V; Output Configuration:Sink / Source; Sensor Housing:Rectangular; SVHC:No SVHC (20-Jun-2011); Contact Configuration:Radial Lead IC; Input Current:8.7mA; No. of Pins:3; Operating Temperature Max:150°C; Operating Temperature Min:-40°C; Output Voltage Max:0.2VDC; Response Time:3µs; Sensor Type:Hall Effect Linear Position Sensor; Series:SS400; Supply Voltage DC Max:10.5V; Supply Voltage Max:10.5VDC; Supply Voltage Min:4.5VDC; Termination Type:Through Hole

The SS490 Series MRL (Miniature Ratiometric Linear) sensors are versatile linear Hall effect devices operated by the magnetic field from a permanent magnet or an electromagnet. The ratiometric output voltage is set by the supply voltage. It varies in proportion to the strength of the magnetic field. The integrated circuitry provides increased temperature stability and sensitivity. Laser trimmed thin film resistors on the chip provide high accuracy (null to ± 3%, sensitivity up to ±3%) and temperature compensation. The positive temperature coefficient of the sensitivity (+0.02 %/°C typical) compensates for the negative temperature coefficients of low-cost magnets. The SS490B Series sensors offer cost-effective MRL sensing with slightly wider specifications than the SS490 products. The SS490B has a typical sinking or sourcing output of 1.5 mA continuous, uses 7 mA of supply current at 5.0 volts at 25°C, for predictable performance over the full temperature range. SS490B Series sensors have wider null and sensitivity tolerances and a wider drift over temperature. NOTE: Products ordered in bulk packaging (plastic bags) may not have perfectly straight leads as a result of normal handling and shipping operations. Please order tape packaging option for applications with critical lead straightness requirements.

Honeywell SS495A

Chip One Stop

Distrelec

Conrad

Sensor; Sink; 4.5 to 10.5 VDC; 8.7 mA @ 5 VDC; 0.2 VDC (Typ.)/0.4 VDC (Min.)

Connector Type

Max Voltage Rating (DC)

Min Output Voltage

Number of Contacts

Sensitivity (mV/g)

Hall Effect Sensor 20mA Latch ±55G 3.3V/5V/9V/12V/15V/18V 3-Pin SOT-23 T/R

Hall Effect Sensor, Digital, Sot-23-3; Sensor Case/Package:Sot-23; No. Of Pins:3Pins; Supply Voltage Min:3V; Supply Voltage Max:24V; Operating Temperature Min:-40°C; Operating Temperature Max:150°C; Product Range:-; Msl:- Rohs Compliant: Yes |Honeywell VF360ST

VF360ST Hall-effect digital position sensor IC, latching, high sensitivity, AEC-Q100 qualification, South pole activated, SOT-23, pocket tape and reel, 3000 units/reel The VF360NT, VF360ST, and VF460S High Sensitivity Latching Digital Hall-Effect Sensor ICs are small, sensitive and versatile devices that are operated by the magnetic field from a permanent magnet or an electromagnet. They are designed to respond to alternating North and South poles. The VF360NT is turned ON by a North pole, while the VF360ST and VF460S are turned ON by a South pole. This sensor IC does not use chopper stabilization on the Hall element, providing a clean output signal and a faster latch response time when compared to competitive high sensitivity Hall-effect latching sensor ICs which do use chopper stabilization. Value to Customers AEC-Q100 qualification provides enhanced reliability and quality of electronic components. Components meeting these specifications are often suitable for use in harsh automotive environments without the customer’s need for additional component-level qualification testing. Designed to provide reliable, consistent performance and a fast response time, enhancing efficiency in brushless dc motor (BLDC) applications. Designed to provide a wide supply voltage range and no chopper delay, allowing for potential use in a variety of applications. Designed to provide a clean output signal without the customer having to include additional circuitry to achieve noise suppression due to chopper stabilization. Differentiation Honeywell’s VF360NT, VF360ST, and VF460S AEC-Q100-qualified latching sensor ICs offer better performance than many competitive sensor ICs that employ chopper stabilization techniques. Response time: Honeywell's device provides a fast response time, enabling efficiency in BLDC motors. No noise generation: Honeywell's device utilizes a resistorcapacitor (RC) circuit to enable noise suppression required for chopper stabilized sensors.

Honeywell VF360ST

JRH Electronics

Linear Hall Effect Sensor Ic Rohs Compliant: Yes |Allegro Microsystems A1315LLHLX-5-T

Tape & Reel (TR) Analog Voltage Hall Effect Surface Mount Hall Effect Sensor

Hall Effect Sensor Monolithic 3.3V Automotive

Allegro MicroSystems A1315LLHLX-5-T

14-Bit Digital Contactless Angle Sensor with ABZ Incremental & PWM Outputs 16-Pin QFN

éœå°”æ•ˆåº”ä¼ æ„Ÿå™¨, -40 è‡³ 125åº¦ C;

HALL EFFECT SENSOR, ANGULAR, QFN-16; Sensor Case / Package:QFN; No. of Pins:16Pins; Supply Voltage Min:3V; Supply Voltage Max:3.6V; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Product Range:-; Qualification:- RoHS Compliant: Yes

Monolithic Power Systems

Monolithic Power Systems MA732GQ-P

Future Electronics

Avnet

Lifecycle Status

Manufacturer Lifecycle Status

14-Bit Digital Contactless Angle Sensor with ABZ Incremental & PWM Outputs

Angular Type Position Sensor 14-Bit Resolution 3V to 3.6V 16-Pin QFN T/R

Hall Effect Sensor, -40 To 125Deg C Rohs Compliant: Yes |Monolithic Power Systems (Mps) MA732GQ-Z

Monolithic Power Systems MA732GQ-Z

MA730 Series 3.3 V 12 mA 14-Bit Digital Contactless Angle Sensor - QFN-16

Tape & Reel (TR) SMD (SMT) Tab PWM Hall Effect Hall Effect Sensor 3.3V -40C~125C

Linear Position Sensor 3.6V Digital Output 16-Pin QFN EP

æ— æŽ¥è§¦è§’ç¼–ç å™¨, -40 è‡³ 125åº¦C;

CONTACTLESS ANGLE SENSOR, -40 TO 125DEGC;

CONTACTLESS ANGLE SENSOR, -40 TO 125DEGC; Sensor Type:Angle Sensor; Sensor Case / Package:QFN-EP; No. of Pins:16Pins; Supply Voltage Min:3V; Supply Voltage Max:3.6V; Operating Temperature Min:-40°C; Operating Temperature Max:125°C RoHS Compliant: Yes

#	MPN	Datasheet
1	ACS712ELCTR-05B-T ALLEGRO MICROSYSTEMS - ACS712ELCTR-05B-T - Linear Current Sensor, Hall Effect, +/- 5A, SOIC-8
2	ACS712ELCTR-30A-T Current Sensor 3A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (.154", 3.9mm Width)
3	SS94A2 HONEYWELL S&C SS94A2 Hall Effect Sensor, Linear, 1 mA, SIP, 3 Pins, 6.6 VDC, 12.6 VDC
4	SS49E Board Mount Hall Effect / Magnetic Sensors Flat TO-92, 3.0Vdc Ratiometric, PCB
5	SS495A Sensor; Sink; 4.5 to 10.5 VDC; 8.7 mA @ 5 VDC; 0.2 VDC (Typ.)/0.4 VDC (Min.)
6	VF360ST Hall Effect Sensor 20mA Latch ±55G 3.3V/5V/9V/12V/15V/18V 3-Pin SOT-23 T/R
7	A1315LLHLX-5-T Linear Hall Effect Sensor Ic Rohs Compliant: Yes \|Allegro Microsystems A1315LLHLX-5-T
8	MA732GQ-P 14-Bit Digital Contactless Angle Sensor with ABZ Incremental & PWM Outputs 16-Pin QFN
9	MA732GQ-Z 14-Bit Digital Contactless Angle Sensor with ABZ Incremental & PWM Outputs
10	MA730GQ-P 14-Bit Digital Contactless Angle Sensor with ABZ Incremental & PWM Outputs